FAQs
DècorSplash

FAQs

What is DécorSplash made of?

It consists of an 0.5mm aluminium skin sandwiched between a high density and heat resistant mineral fibre core. DécorSplash panels are also coated with an unique high gloss metallic paint using nano technology providing a mirror-like finish.

What sizes does DécorSplash come in?

It comes in 6 sizes:
3100mm x 1500mm
3100mm x 748mm
2100mm x 1500mm
2100mm x 748mm
900mm x 750mm
600mm x 750mm

How heavy is DécorSplash?

DécorSplash is only 7kgs per square metre.

How thick is the DécorSplash panel?

The panels are 4mm thick.

Can DécorSplash be installed behind a gas hob?

Yes, it is tested and complies with NZS: 5601.1.2013. 


Measure the area DécorSplash is going to cover including any PowerPoints (if applicable). Mark the measurements on the reverse side of the panel.

Note: If any electrical works are to be performed, this should be carried out by a certified electrician. If using behind a gas hob we do recommend a minimum distance of 110mm between the edge of the rear burner and DecorSplash. For electrical or induction, a minimum of 30mm is recommended


Is it suitable in a bathroom?

DécorSplash are more than just splashbacks for your kitchens, it is steam resistant and 100% waterproof making it ideal for wet areas. They can be used as a wall panelling application for shower and bathroom areas. Given the large sheet sizes, DécorSplash can provide that grout free alternative to a tiled shower recess.

Not only is it suitable for the bathroom area, it can be installed in laundry areas too. 

DecorSplash can be installed directly on top of an existing tile wall for an express bathroom upgrade.


What's the warranty on DécorSplash?

It comes with a 7 year warranty on the sheet, giving you piece of mind.

Can I cut or drill DécorSplash panels myself?

Yes, you can use a jig-saw for power sockets and cut the DécorSplash panels using a skill saw with a blade that is compatible with Aluminium.

How do I join DécorSplash panels together?

You can butt join them or use our aluminium joiners.

What if I don’t like the exposed edge?

We supply aluminium end caps that tidy the ends up and provides that flawless finish.

How do I clean DécorSplash?

DécorSplash can be cleaned using a damp microfiber cloth with common household detergents. If you are unsure on the cleaning agent, apply a small amount or contact us. We do not recommend abrasive cleaning agents as it will damage the surface.